Views: 0 Author: Site Editor Publish Time: 2019-01-23 Origin: Site
When we buy tents, we often see words like one layer, two layers, and three layers. What is the difference between tents marked with different layers? The functional differences of tents with different layers are different. Let's take a look at the functional differences of tents with different layers. Functional differences of tents with different layers
Single-layer tent
The manufacturing process of single-layer tents is relatively simple, and its biggest feature is lightness, economy, and small size.
Double-layer tent
The difference between double-layer and single-layer is that a layer of inner tent with better air permeability is added in the design. In cooler seasons, the heat discharged by the human body will condense water droplets on the inner wall of the tent under the action of the air outside the tent. If it is a single-layer tent, the water droplets will flow down the inner wall of the tent and wet the sleeping bag. After adding the inner tent, the outer tent is not directly connected to the inner tent. At this time, the heat emitted by the human body will pass through the inner tent, so that the water droplets condensed on the outer tent will flow into the ground, which solves the problem of water condensation on the inner wall of the single-layer tent.
Three-layer tent
The design of the three-layer tent is to hang a layer of cotton tent in the inner tent, which further enhances the warmth effect. Even if the outdoor environment is around minus 10 degrees, the temperature inside the tent can be kept around zero degrees due to the protection of the cotton tent, so that the temperature inside the tent is not too low.
Therefore, when the ambient temperature is above 5 degrees, it is more suitable to use a single-layer tent. When the ambient temperature is below 5 degrees, it is best to use a double-layer or triple-layer tent to prevent water from condensing on the inner wall of the tent and avoid frostbite.
